VM95EH cartridge in headshell

We recommend it as a replacement cartridge for a wide variety of turntables - in particular all the Japanese brands from the 70s and 80s like Apan, Hitachi, JVC, Kenwood, Luxman, Marantz, National Panasonic Technics, Onkyo, Pioneer, Sansui, Sanyo, Sharp, Sony, Teac, Toshiba, Yamaha etc. 

When mounted in a headshell it needs to be correctly aligned and the tracking force and anti-skating set to 2gm. An Ortofon alignment template and stylus force gauge are useful tools to help do this correctly.

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. 

•  VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
• Aluminium cantilever
• Specially wound coils increase output voltage
• Durable low-resonance polymer housing
• Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
• Compatible with any AT-VMN95 replacement stylus

• SPECIFICATIONS

  Frequency Response	20-22,000 Hz
  Channel Separation	20 (dB at 1 kHz)
  Vertical Tracking Force	1.8-2.2g (2.0g standard)
  Stylus Construction	Bonded round shank
  Recommended Load Impedance	47,000 ohms
  Output	4.0 mV (1 kHz, 5 cm/sec.)
  Channel Balance	2.0 dB (1 kHz)
  Stylus Shape	0.3 x 0.7 mil elliptical
  Cantilever	Aluminium pipe
  Mount	Half-inch
  Replacement Stylus	AT-VMN95E
  Coil Impedance	3.3 k ohms (1 kHz)
  DC Resistance	485 ohms
  Load Capacitance	100 to 200 pF
  Coil Inductance	550 mH (1 kHz)
  Vertical Tracking Angle	23°
  Dimensions	17.2mm H × 18.9mm W × 28.3mm D
  Weight	6.1g
  Accessories Included	Two 11mm installation screws, two 8mm installation screws, two washers